Sales office in Turkey

Simirna Endüstriyel Kimya

P.O.BOX: Turkey Turkey - Simirna Endüstriyel Kimya San. ve Dış Tic. A.Ş. A.O.S.B, 10040. Sk. No:9, 35620 Atatürk Osb/Çiğli/İzmir

View all sales offices

Diamond® Veneer Finish Sanded

DIAMOND® Brand Veneer Finish—Sanded is a white, sanded finish formulated for hand application over IMPERIAL® Brand Gypsum Base. It can also be used as the finish for a two-coat system over a sanded gypsum basecoat, IMPERIAL® Brand Veneer Basecoat or DIAMOND® Brand Veneer Basecoat. This veneer finish is pre-aggregated for textured or skip-trowel finishes applied to a nominal thickness of 1.5mm-2.5mm. DIAMOND Veneer Finish—Sanded is recommended for interior wall and ceiling surfaces, and over properly prepared monolithic concrete. It is ideal for residential construction including single-family dwellings, high-rise buildings and garden apartments. It provides a strong, hard surface that resists abrasion and surface cracking, creates a beautiful white finish and offers a fire rating of up to four hours. Sound-rated assemblies up to 62 STC satisfy any residential or commercial requirement. DIAMOND Veneer Finish – Sanded applies easily and dries in as little as 24 hours for next-day decoration. It can be richly textured to create Spanish, swirl, stippled, float and other types of texture.

In stock
  • Abrasion Resistant

  • Crack Resistant

  • Wet Area


  • Excellent for texturing
  • Finish coat for one- and two-coat veneer plaster systems
  • Fast drying—permits next-day decorating
  • Pre-aggregated for convenience and higher productivity
  • Product data:
    • Material: White, mill-prepared plaster finish.
    • Surface Hardness: 40kg (418 N) required to depress a 10 mm dia. steel ball 0.01 (0.25 mm) into finish coat applied over veneer or sanded gypsum basecoat.
    • Compliance with Standards: Complies with ASTM C587 and Federal Specification SS-P-00402B, Type VI.
    • Warning: Store all IMPERIAL Gypsum Base flat. Panels are heavy and can fall over, causing serious injury or death. Do not move unless authorized.
    • Dry Density: 1.18-1.24 kg/m2.
    • pH: 12.5.
    • Setting Time: 55-75 minutes.
    • Storage: Store material in a cool, dry place. Avoid direct sunlight. Maintain temperature above 4°C.
    • Shelf Life: 3 to 6 months with proper storage.
    • Packaging: 22.7 kg bags.

Innovative Interior Finishes

SHEETROCK®️ Ready Mixed Joint Compounds

Jointing and finishing mixing of compounds

Jointing and finishing joint tapes

Jointing and finishing recess and tapered edge joint

Jointing and finishing butt and square edge joints

Jointing and finishing internal corners

Jointing and finishing external corners

Compound additions jointing and finishing mechanical jointing tools

Jointing and finishing screws and fasteners

Jointing & Finishing of Plasterboard System

Ceiling Specification Format (CSI)
Sustainability tool