USG ME Building Materials; Ceiling, gypsum boards metal framing

Metal Framing

Back To Top Back To Top

Inclined Track - TRI3050-060

Used in special framing applications as the top and bottom channels for securing wall studs at floor and ceiling junctions, used in framing application for constructing Inclined Walls. Radius can vary as per the project requirement.
Thickness
Zinc Coating


Features
  • Used in special framing applications as the top and bottom channels for securing wall studs at floor and ceiling junctions, used in framing application for constructing Inclined Walls.
  • Radius can vary as per the project requirement.
Specifications
Physical Properties:
  • Length: 3,000 mm standard
  • Web depth: 50, 64, 75, 92, 100, 125, 150 and 200 mm
  • Flange: 30 / 30 mm; 50 / 50 mm; 70 / 70 mm
  • Thickness: 0.60, 0.70, 0.80, 0.90, 1.2, 1.5 and 2.0 mm
  • Inclination degree: 45 to 89 degree
  • Raw materials: Galvanized steel G40-G90
  • Steel grade: Yield stress, Fy 33 ksi Ultimate
ASTM & Code Standards:
  • Inclined Tracks are produced to meet or exceed ASTM C645 and C955
  • Galvanized sheet steel meets or exceeds requirements of ASTM A-653
  • For installation & storage information refer to ASTM C1007 & C754
Green Benefits and Recycled Content:
  • LEED Credit MR 2 – USG products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream.
  • LEED Credit MR 4 – USG’s steel products have a minimum of 25.5% postconsumer recycled content, and 6.8% pre-consumer.

Item

Thickness

Zinc Coating

TRI3050-060
0.6
180
TRI3050-090
0.9
270
TRI3064-060
0.6
180
TRI3064-090
0.9
270
TRI3092-060
0.6
180
TRI3092-090
0.9
270

Featured Products

Items in Bucket

GO TO BUCKET
;
My Submittals
Caution

Caution

OK
Caution

Caution

Yes No

My Submittals

Close
You don't have any submittals added