USG ME Building Materials; Ceiling, gypsum boards metal framing

Metal Framing

Back To Top Back To Top

Shaftwall Framing Systems - E Stud - 600ES-23

USG Shaftwall Framing Systems-E Stud, used to construct elevator shafts, mechanical shafts, stairwells, air return shafts and horizontal membranes, thickness range from 0.6 to 1.5 mm with Zinc coating 180-270 g/m².
Thickness
Zinc Coating


Features
  • Meet or exceed all international code requirements
  • Fully compatible with all standard wall boards
  • Knurled flanges for easier attachment of exposed materials
  • Dimensionally stable with High load bearing capacity
  • Won’t warp, twist or bow
  • Length is optional and can be customized as per customer needs
  • Large range of size and thickness available
  • Available with High Recycled Content (HRC)
Specifications
Physical Properties
  • Yield stress, Fy 33 ksi Ultimate, with G90 Zinc coating
  • ASTM & Code Standards: Shaftwall E studs are produced to meet or exceed ASTM C645 and C955
  • Galvanized sheet steel meets or exceeds requirements of ASTM A-653
  • For installation & storage information refer to ASTM C1007 & C754
  • Green Benefits and Recycled Content: LEED Credit MR 2 – USGBoral products are manufactured from cold formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream
  • LEED Credit MR 4 – USGBoral steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer.

Item

Thickness

Zinc Coating

212ES-23
0.8
270
212ES-32
0.8
270
212ES-34
0.9
270
212ES-48
1.2
270
212ES-58
1.5
270
400ES-23
0.6
180
400ES-32
0.8
270
400ES-34
0.9
270
400ES-48
1.2
270
400ES-58
1.5
270
600ES-23
0.6
180
600ES-32
0.8
270
600ES-34
0.9
270
600ES-48
1.2
270
600ES-58
1.5
270

Featured Products

Items in Bucket

GO TO BUCKET
;
My Submittals
Caution

Caution

OK
Caution

Caution

Yes No

My Submittals

Close
You don't have any submittals added