We're sorry, an error has occurred while generating this content.

Inclined Track

Used in special framing applications as the top and bottom channels for securing wall studs at floor and ceiling junctions, used in framing application for constructing Inclined Walls. Radius can vary as per the project requirement.

As low as SAR1.00
In stock
Only %1 left
SKU
inclnd-trk-main

Features

  • Used in special framing applications as the top and bottom channels for securing wall studs at floor and ceiling junctions, used in framing application for constructing Inclined Walls.
  • Radius can vary as per the project requirement and ceiling junctions, used in framing applications for constructing Inclined Walls.
  • Physical Properties
    • Length: 3,000 mm standard
    • Web depth: 50, 64, 75, 92, 100, 125, 150 and 200 mm
    • Flange: 30 / 30 mm; 50 / 50 mm; 70 / 70 mm
    • Thickness: 0.60, 0.70, 0.80, 0.90, 1.2, 1.5 and 2.0 mm
    • Inclination degree: 45 to 89 degree
    • Raw materials: Galvanized steel G40-G90
    • Steel grade: Yield stress, Fy 33 ksi Ultimate
  • ASTM & Code Standards:
    • Inclined tracks are produced to meet or exceed ASTM C645 and C955
    • Galvanized sheet steel meets or exceeds requirements of ASTM A-653
    • For installation & storage information refer to ASTM C1007 & C754
  • Green Benefits and Recycled Content:
    • LEED Credit MR 2 – USG products are manufactured from coldformed steel. Steel is 100% recyclable, which helps divert debris from the waste stream.
    • LEED Credit MR 4 – USG Boral’s steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer.
Item Size Color Edges Cac Nrc Thickness
TRI3050-090 30x50x30mm
TRI3064-060 30x64x30mm
TRI3064-090 30x64x30mm
TRI3092-060 30x92x30mm
TRI3092-090 30x92x30mm

Shaftwall Installation

Ceiling Specification Format (CSI)
Systems Catalogue
Installation Guide
Warranty
Sustainability tool