Sales office in Turkey

USG Middle East - Turkey

P.O.BOX: Turkey Turkey - Simirna Endüstriyel Kimya San. ve Dış Tic. A.Ş. A.O.S.B, 10040. Sk. No:9, 35620 Atatürk Osb/Çiğli/İzmir

View all sales offices

Suitable drying-type joint compound for all three coats or as a finishing coat for all drywall joints, angles, and fastener heads. Sheetrock® All Purpose Joint Compound (Powder) for interior drywall applications. It combines effective taping and topping qualities into a single product for applications where the best results of specialized compounds are not required. Additionally, this drying joint compound has good texturizing abilities. adheres to ASTM C475.


Mixing ease, wet-mix stability: USG Middle East Sheetrock® drying-type All Purpose Joint Compound (Powder) go into solution fast, can be used after short soaking period. Compounds retain consistency for extended periods without re-stirring or adjustment of mix.


Smooth workability: Improved application properties assure consistently superior workability from beginning to end of batch—assure smooth, uniform joint surfaces. Excellent cohesion and consistency of wet-mix keep droppings to a minimum. Virtually eliminate costly clean up.


Simplify decorating: Smooth finished joints simplify application of paint or wallpaper. Also it can be used for textured effects. USG Middle East Sheetrock® drying-type All Purpose Joint Compound (Powder) is a suitable material for producing light, handapplied textures.


Longer shelf life: Drying-Type compounds are basically inorganic in composition— have long package life up to 24 months.

SAR 1.00
In stock
  • Highly Performance Joint Compound



Sheetrock® Drying Type All Purpose Joint Compound (Powder) features

  • For interior drywall applications.
  • Fast smooth application.
  • Three job-tested types—taping, topping, all purpose.
  • Easy to mix, offer ample working time.
  • Retain consistency—will not thin out or settle.
  • Can be used for simple, hand-applied textures.


Sheetrock® Drying Type All Purpose Joint Compound (Powder) application

Cover joint with a thin layer of compound and embed tape, leaving about 150mm of compound under feathered edge. Let dry and sand lightly as required. Apply second coat, feathering 50mm beyond first coat. Let dry, sand lightly as required and then apply third coat, feathering 75mm beyond second coat. Sand lightly as required when dry. Finish fastener heads, corner bead and inside corners as required with at least three coats of joint compound, feathered out onto panel faces and sanded lightly as required.


Innovative Interior Finishes

SHEETROCK®️ Ready Mixed Joint Compounds

Jointing and finishing mixing of compounds

Jointing and finishing joint tapes

Jointing and finishing recess and tapered edge joint

Jointing and finishing butt and square edge joints

Jointing and finishing internal corners

Jointing and finishing external corners

Compound additions jointing and finishing mechanical jointing tools

Jointing and finishing screws and fasteners

Jointing & Finishing of Plasterboard System

Ceiling Specification Format (CSI)
Sustainability tool