Sales office in Turkey

USG Middle East - Turkey

P.O.BOX: Turkey Turkey - Simirna Endüstriyel Kimya San. ve Dış Tic. A.Ş. A.O.S.B, 10040. Sk. No:9, 35620 Atatürk Osb/Çiğli/İzmir

View all sales offices

USG Middle East Premium Premix joint compound is an air-drying. Lightweight compound suitable for all three coat applications or as a finishing coat for all plasterboard joints. Angles and fastener heads. Complies with ASTM C475.

USG Middle East Premium Premix is suitable for use as all three coats in the USG three coat jointing system and for the final coating of plasterboard joints. Angles and fastener heads when used in conjunction with USG setting type joint compounds for first and second coats.

SAR 1.00
In stock
SKU
JCAPP-28
  • Crack Resistance

  • Highly Performance Joint Compound

Features

 

USG Middle East Premium Premix features

  • For interior drywall applications
  • Minimal shrinkage
  • Easy sanding
  • Exceptional crack-resistance
  • Excellent bond
  • Smooth finish

 

USG Middle East Premium Premix application

  • Surfaces must be clean and free from dust.
  • USG Middle East Premium Premix be diluted to a workable viscosity by adding water if desired followed by mechanical mixing.
  • Can be applied by hand or mechanical tools.
  • When using USG Middle East Premium Premix for all three coats, the first coat must be used to bed a high-quality paper tape
  • First Coat (150mm wide)
    • Cover joint with a thin layer of compound and embed paper tape. Leaving at least 1mm of compound under feathered edge. Let dry and sand lightly.
  • Second Coat (200mm wide)
    • Apply second coat, feathering approximately 50mm beyond first coat. Let dry and sand lightly.
  • Third Coat (275mm wide)
    • Apply third coat. Feathering 75mm beyond second coat. Let dry and sand lightly.
    • Finish fastener heads. Corner beads and inside corners as required with at least three coats of joint compound, feathered out onto panel faces and finished to a smooth surface.
    • USG Middle East Premium Premix compound must be allowed to dry thoroughly (up to 24 hours depending on temperature and humidity) before re-coating or sanding.
    • Only apply over setting type compounds that have been allowed to dry thoroughly.
    • Sand with care using 180 to 220 grit sandpaper.
    • Thoroughly clean all tools and equipment after use

Innovative Interior Finishes

SHEETROCK®️ Ready Mixed Joint Compounds

Jointing and finishing mixing of compounds

Jointing and finishing joint tapes

Jointing and finishing recess and tapered edge joint

Jointing and finishing butt and square edge joints

Jointing and finishing internal corners

Jointing and finishing external corners

Compound additions jointing and finishing mechanical jointing tools

Jointing and finishing screws and fasteners

Jointing & Finishing of Plasterboard System

Ceiling Specification Format (CSI)
Warranty
Sustainability tool